BKI

MODEL BKI DELI CENTER

BKI DELI CENTER

VGG-8-F (ROTISSERIE TOP)

  • Touchscreen controls
  • Flat glass doors
  • LED lights illuminate cavity to attract customer attention
  • Easy-to-clean bright annealed stainless steel interior
  • 15 program modes with pre-heat and hold capability
  • Cool door for safety
  • Solid back design
  • Assembled in USA

ETE-062R FEATURES (COMBI OVEN BELOW)

  • Large 10" Touchscreen Control
  • Humidity control from 0-100%
  • Patented Meteo and SteamTuner

Systems

  • RecipeTuner and RackControl functionality
  • 6 fan speeds
  • LED lighting
  • USB port for uploading recipes
  • Over 1,000 menu items
  • 9 steps per menu
  • Cook by method or product type
  • Automatic washing system
  • Standard 2 year parts & labor warranty

VGG-8-F (ROTISSERIE TOP)

ETE-062R (COMBI OVEN BELOW)

MODEL BLG-F

  • California Energy Wise Rebate Qualified
  • 18 lb (8.2 kg) product, 75 lb (34kg) oil capacity
  • Auto-lift basket for precise cooking
  • 5" casters for easy mobility
  • Gas operation
  • Stainless steel construction
  • Microprocessor controlled for enhanced cooking capabilities
  • Built-in filtration system
  • Assembled in the U.S.A.

X-LARGE VOLUME DEEP FRYER – AUTO-LIFT – TOUCHPAD CONTROLS – FILTER SYSTEM

MODEL BLG-FC

MODEL ALF-FC

  • 14 lb (6.4 kg) product, 48 lb (21.8 kg) oil capacity
  • Auto-lift basket for precise cooking
  • 3" casters for easy mobility
  • Stainless steel construction
  • Microprocessor controlled for enhanced cooking capabilities
  • Built-in filtration system
  • Assembled in USA

LARGE VOLUME DEEP FRYER – AUTO-LIFT – TOUCHPAD CONTROLS – FILTER SYSTEM

MODEL ALF-FC

MODEL OC-90

  • Tank constructed of stainless steel
  • OC-90 150 lb oil capacity
  • OC-80 75 lb oil capacity
  • Bidirectional vane pump allows for easy pickup and disposal
  • Fluoroelastomer pump shaft seal resists degradation from pumping hot cooking oil
  • Pump can transfer up to 150 lbs of oil in less than 2 minutes
  • Removable tank cover permits easy cleaning of tank
  • 54 inch, high temperature, long life hose
  • Hose can handle up to 300° temperatures
  • Wand allows pickup of oil from the top of the vat. This avoids breading clogs of the pump as in competitor’s units which are drained into from the bottom of the fry vat.
  • Balanced transport position, eight inch wheels, and dual handles provide for ease in transport

DEEP FRYER OIL CADDY

MODEL OC-90

MODEL VGH-8

  • Two-stage filtration keeps grease-laden particles from returning to the air
  • Signal light alerts operator to replace dirty filters, check filter placement, and latch doors
  • Safety shut-off if hood door/ filter is ajar or hood power is cut off

VENTLESS HOODS

MODEL VGH-5 & VGH-8

MODEL FH-28

  • Patented two-stage filtration
  • Signal light alerts operator to change filter
  • Appliance receptacle
  • Stainless steel exterior
  • Fire extinguishing system

EXTRA-LARGE VENTLESS HOOD – FREESTANDING – REPLACEABLE FILTERS

MODEL FH-28

MODEL VGG-5-C

  • Touchscreen controls
  • Curved glass doors
  • Lighted cavity to attract customer attention
  • Easy-to-clean interior
  • Electric operation
  • 15 program modes with pre-heat and hold capability
  • Cool door for safety
  • Solid back design
  • 100% hand built in the U.S.A.

ROTISSERIE

MODEL VGG-5-C

MODEL VGG-8

  • Touchscreen controls
  • Curved glass doors
  • Lighted cavity to attract customer attention
  • Easy-to-clean interior
  • Electric operation
  • 15 program modes with pre-heat and hold capability
  • Cool door for safety
  • Solid back design
  • 100% hand built in the U.S.A.

ROTISSERIE

MODEL VGG-8-C

MODELS WDCG-3 WDCG-4 & WDCG-7

  • LED Lights Coming Standard December 2019
  • Touchscreen controls provides precise temperature for each well as well as top and bottom heat
  • Countertop or floor models
  • 5” deep wells
  • Choose from 3, 4, 5, 6, or 7 hot well models
  • Glass or solid end panels
  • Front bumper on floor models
  • Choice of curved or straight glass
  • Rear service doors available in mirrored or clear glass
  • Front glass lifts up and locks for cleaning access
  • Fold-down, removable cutting board
  • Assembled in USA

WDCG Series of Hot Food Display Cases

MODEL WDCG-3 & WDCG-4 

 

MODEL MDW-48-4CFM MERCHENDISERS

  • Energy-efficient heating technology provides uniform shelf temperature
  • Electronic thermostat control on each shelf
  • Stainless steel shelf surface is durable and easy to clean
  • Single glazed end walls with attractive profile

48" MULTI-SHELF MERCHANDISER WITH FULL BASE – SELF-SERVE – CASCADING SHELVES

MODEL MDW-48-4CFM

MODEL MM-4

  • 4' wide
  • 6" deep well
  • LED lighting
  • Removable plexiglass guards for easy cleaning
  • Well surface thermometer
  • Waterless deli technology
  • Removable panel for access to serpentine heating elements
  • 6" casters for easy mobility
  • 8 gauge 6' cord with plug
  • Assembled in USA

4' WIDE MOBILE HOT FOOD MERCHANDISER – SELF-SERVE – WATERLESS

MODEL MM-4

 

MODEL ETG062R & ETG102R

  • Large 10" Touchscreen Control
  • Humidity control from 0-100%
  • Patented Meteo and SteamTuner Systems
  • RecipeTuner and RackControl functionality
  • 6 fan speeds
  • LED lighting
  • USB port for uploading recipes
  • Over 1,000 menu items
  • 9 steps per menu
  • Cook by method or product type

FULL-SIZED • BOILERLESS • GAS & ELECTRIC OPERATION • TOUCHSCREEN CONTROLS

MODEL ETG062R & ETG102R

BIRO

MODEL 1433FH MEAT SAW

Finish: Stainless steel, nickel
Head Structure: Fixed Stainless steel.
Motor: 3HP (2.2kw), 50 or 60 Hz, 3 phase totally enclosed, 1 phase available.
Switch: Watertight magnetic starter with terminal overload and under voltage protection.
Blade: 5/8” (16mm) x 108” (2743mm)

MODEL
1433FH MEAT SAW

MODEL 3334SS-4003FH MEAT SAW

Finish: Stainless steel, nickel
Head Structure: Fixed Stainless steel.
Motor: 3HP (2.2kw), 50 or 60 Hz, 3 phase totally enclosed, 1 phase available.
Switch: Watertight magnetic starter with terminal overload and under voltage protection.
Blade: 5/8” (16mm) x 108” (2743mm)
5/8” (16mm) x 124” (3150mm)

MODEL
3334SS-4003FH MEAT SAW

MODEL 822SS MEAT GRINDER

Finish: High polish stainless steel case, tinned bowl, ring, and worm.
Motor: 1HP (.75kw), 115/230v, 60 Hz 1 or 3 phase open standard; 50 Hz available.
Switch: Toggle activator with magnetic contactor.

MODEL
822SS MEAT GRINDER

MODEL 346SS MEAT GRINDER

Finish: Stainless steel case, tray and guard, tinned bowl, ring, and worm.
Motor: 3 HP (2.25kw), various voltages, 50/60 Hz 1 or 3 phase.
Switch: Magnetic type with thermal overload and under voltage protection.

MODEL
346SS MEAT GRINDER

MODEL MINI-32 MIXER GRINDER

Finish: Stainless steel hopper, frame, lid, and paddle. Tinned bowl, ring and auger.
Motor: 3 HP (2.2kw), 208Vm 60 Hz, 3 Phase. 50 Hz available; 60Hz, 1 Phase.
Drive System: Auger-single reduction chain drive, Mixer-double reduction gear drive.

MODEL
MINI-32 MIXER GRINDER

MODEL MINI-32 MIXER GRINDER

Finish: Stainless steel hopper, legs, lid and paddle. Tinned bowl, ring, and auger.
Motor: standard: 5HP (3.7kw) 208V, 60 Hz, 3 Phase.
Optional: 7 ½ (5.6kw), 208, 60 Hz, 3 Phase.
(Extra cost) 7 ½ (5.6kw), 208/380V, 50 Hz, 3 Phase.
5HP (3.7kw), 220V, 60Hz, 3 Phase
5HP (3.7kw), 220V, 50Hz, 1 Phase
Drive System: Tandem single reduction oil bath speed reducers with heavy duty mechanical clutch.

MODEL
MINI-32 MIXER GRINDER

MODEL VTS-41-110 VACUUM MARINATING TUMBLER

Finish: Stainless steel frame, except wheels and lid gasket.
Drum Motor: 1/25 HP (.03kw) 115V, 60 Hz, 1 phase.
Vacuum Pump: 1/8 HP (.09kw), 115V, 60 Hz, 1 phase.

MODEL
VTS-41-110 VACUUM MARINATING TUMBLER

MODEL B350M GRAVITY FEED MANUAL SLICER

Finish: Body- Anodized polished aluminum cast with non-corrosive metal frame.
Motor: IP 65-1/2 HP (.35kw) 115V 60 Hz 1 PH internally cooled, water resistant.
IP 65-1/2 HP (.35kw) 220V 50 Hz 1 PH internally cooled, water resistant.

MODEL
B350M GRAVITY FEED MANUAL SLICER

MODEL 109PCM HORIZONTAL SLICER

Electrical: 2HP (1.5kw), 208/220/440 volts, 60Hz, 3 phase, 220/380/415 volts, 50 Hz, 3 phase, 10’ cord no plug. Specify voltage prior to ordering.
Finish: Stainless steel frame and skin. Lexan chamber lid
Safety: Magnetic interlocks on all doors, brake motor, locking casters, OSHA lockout power switch.

MODEL
109PCM HORIZONTAL SLICER

MODEL PRO-9 SERIES TENDERIZERS

Finish: Stainless steel case and top. Lexan Hopper cover
Motor: 1/2 (.38kw) or 3/4 (.56kw) HP. 115-60-1 or 230-60-1 open type. 50 Hz available.
Switch: On/Off toggle type with cover safety switch.

MODEL
PRO-9 SERIES TENDERIZERS

MODEL F2000N PATTY FORMERS

Finish: Anodized polished aluminum body with stainless steel enclosures.
Motor: 1 HP (.75kw), 115V 60Hz 1ph.
Production: 2000 single shapes per hour.

MODEL
F2000N PATTY FORMERS

MODEL 6642 MEAT GRINDER

Finish: High polish stainless steel case, tinned bowl, ring, and worm.
Motor: 2 HP (1.5kw), 115/230V, 60Hz, 1 or 3 phase standard; 50 Hz available.
Switch: Waterproof push button with magnetic contactor.

MODEL
6642 MEAT GRINDER

ISHIDA

MODEL ISHIDA UNI-3

  • Blue alphanumeric LCD display (23 digits, 16 segments) or backlit alphanumeric LCD display (23 digits, 7 segments)
  • Dual-range weighing (0-15 lb x 0.005 lb/15-30 lb x 0.01 lb)
  • Side-load label
  • Fast printing speed (3.9 in/ 360 mm per second)
  • Meat nutrition labeling
  • Multiple label formats for multi-department support
  • Powerful batch printing feature
  • Static TCP/IP Ethernet communication
  • 94 one-touch preset keys, 188 presets (assign two items/key)
  • Flash ROM for remote update of application software
  • 2 MB standard memory
  • Proportional tare
  • Compatible with third-party communication software, including ADC's InterScale, Invatron's PLUM and Droste's PCScale Manager

 

ISHIDA
UNI-3 SERIES

MODEL ISHIDA UNI-7

  • Large color touchscreen (7 in)
  • Adjustable touchscreen viewing angle
  • Color graphics on customer-side display (not available on part number 109368, labeler scale)
  • Dual-range weighing (0-15 lb x 0.005 lb/15-30 lb x 0.01 lb)
  • Front-load label cassettes
  • Supports multiple label formats
  • Internal wireless communications, 802.11 b/g
  • Ethernet communications
  • Up to 99 pages of preset keys
  • 77 tactile keys
  • 4 MB expandable to 2 GB
  • Self-serve mode/operation
  • 30+ selectable fixed bar code formats
  • Configurable for different languages including Spanish, French and German
  • Compatible with third-party communication software, including Invatron’s PLUM and ADC’s InterScale

ISHIDA
UNI-7 SERIES

MODEL ISHIDA WM-NANO TABLETOP

  • 7-inch color LCD touchscreen with backlight and positive input response
  • Adjustable touchscreen viewing angle
  • Dual-range weighing (0-15 lb x 0.005 lb/15-30 lb x 0.01 lb)
  • Front-load label cassettes
  • Internal wireless communications, 802.11 b/g
  • Ethernet communications
  • Up to 99 pages of preset keys
  • 77 tactile keys
  • 4 MB expandable to 2 GB
  • 30+ selectable fixed bar code formats
  • Compatible with third-party communication software, including Invatron’s PLUM and ADC’s InterScale

ISHIDA
WM- NANO TABLETOP

DANIEL'S

MODEL DMX AND QUAD 100

Features:

  • Capacity 100 lbs. (45 1/3 Kg.)
  • 1 hp motor QUAD
  • 3/4 hp motor DMX
  • Available in QUAD or DMX models
  • LED timer
  • Made in USA

MODEL
DMX and QUAD 100

MODEL DFS-30 With optional sausage table

Features:

  • Made in the USA
  • Removable Tank
  • Reliable Hydraulic Powered
  • Capacity 30 lbs. (13.5 liters)
  • Stainless Steel Construction
  • Shown with optional Table No. 45015
  • Includes Four Extruding Nozzels

MODEL
DFS-30 (With optional sausage table)

MODEL DFS-55 (With optional positioner)

Features:

  • Made in the USA
  • Easy to Move Around
  • Self Locking Lid
  • Holds 55 lbs. (25 liters)
  • All Stainless Steel Construction inside & outside.
  • NSF & UL Listed
  • Includes Four Extruding Nozzels

MODEL
DFS-55 (With optional positioner)

MODEL DFS-55 WDVTS 100 TUMBLER

Features:

  • Made in the USA
  • 100 lb. Capacity
  • 115 Volt
  • Variable Speed 0 – 16
  • All Stainless Steel Construction
  • Four Swivel Locking Casters
  • Easy to Remove Lid
  • LED Timer
  • Cutting Board Top

MODEL
DFS-55 WDVTS 100 TUMBLER

MODEL 18000 TOTE DUMP

Features:

  • Made in the USA
  • 100 lb. Capacity
  • 115 Volt
  • Variable Speed 0 – 16
  • All Stainless Steel Construction
  • Four Swivel Locking Casters
  • Easy to Remove Lid
  • LED Timer
  • Cutting Board Top

MODEL
MINI-32 MIXER GRINDER

JOHN BOOS

2 & 3 COMPARTMENT SINKw/2 drainboard with stainless steel base & bracing

STANDARD: 16 ga. 300 S/S welded Bowls

                       16 ga. 300 S/S Deck and Splash

                       10" Back Splash

                       12" or 14" Deep Bowls

Two and three Compartment Sinks

MODEL THICK MAPLE TOP TABLE STAINLESS STEEL BASE

  • 1-3/4" Thick Hard Rock Maple Top, Style "SC" Flat Top
  • Finished w/Penetrating Oil, Optional Varnique Finish (Voids NSF)
  • Stainless Steel Base & Under Shelf, #4 Polish Satin Finish
  • Under Shelf Adjustable To Desired Height
  • Adjustable Bullet Feet
  • Shipped Knocked Down, Easy To Assemble

Thick Maple Top Work Table Stainless Steel Base

MODEL STAINLESS STEEL WORK TABLE

  • 14 GA Stainless Steel Top, Type 300 SS, #4 Polish Satin Finish, & Sound Deadened
  • 1-1/2" Stallion Edge On Front, w/Side Edges 90 Degree Bend Down
  • Stainless Steel Base & Under Shelf, Type 300 SS, #4 Polish Satin Finish
  • Under Shelf Adjustable To Desired Height
  • Adjustable Bullet Feet
  • Ships K.D.

MODEL
822SS MEAT GRINDER

STAINLESS STEEL TRIMMING TABLES W/3/4" POLY 1000 W/6" BOXED BACKSPLASH NON-REMOVABLE

  • 3/4" Thick High Density Polyethylene Top, Sectioned Per NSF Regulation
  • Top Is Held In Place By Welded Clips, Top Is Removable For Easy Cleaning
  • Optional Style "SC" 1-3/4" Thick Hard Rock Maple Tops
  • Stainless Steel Base & Bracing, Type 300 SS, #4 Polish Satin Finish
  • Welded Set-up, Available Knocked-Down

 

MODEL
346SS MEAT GRINDER